How to install a bathroom bidet: learn step by step:
Are you building or renovating your bathroom and planning to install a bidet, but want to know the step-by-step instructions on how to install a bathroom bidet? So you’ve arrived at the right post!
The bidet is an item that always generates some controversy. First, because of the space, as it is an extra tableware in the environment. Second, because not everyone approves of the item’s functionality, even considering it unhygienic.
However, the bidet does facilitate the intimate hygiene of both adults and children and elderly people who prefer to clean themselves with water after using the toilet.
In addition, the bidet is faster than a bath, helping everyone’s comfort and well-being. Read on and understand how to install a bathroom bidet.
Guide on how to install a bathroom bidet:
If you’re building, planning a bathroom bidet is easier than planning a renovation. This is because it is necessary to have the drainage and water supply pipes laid out in the hydraulic network.
Another important detail is whether the bidet will only have temperature regulation (with hot and cold water) or only cold water. Thus, depending on the structure of the bathroom, it will be necessary to make some adjustments to the plumbing.
This choice will also influence the type of tap/mixer. There are bidet models:
– with separate faucets (one for cold water and one for hot water. In this case, the water temperature regulation is done by manipulating both manually);
– with single faucet, only for cold water;
– with unique mixer that regulates hot and cold water on the same lever.
Another important detail before installation is the positioning of the bidet. When building, plan from the beginning where it will be.
Preferably, keep the piece to the side of the vase to make it easier to move from one to the other. Sanitary ware can be in the common area or have a reserved area with a door, giving more privacy for the moment of intimate hygiene.
How to install a Bathroom Bidet:
In order not to run the risk of installing the wrong bathroom bidet, ask a plumber to help you step by step.
Below we summarize the main points on how to install a bathroom bidet:
1. Drill the three or two holes required for water inlet and drainage. If the system has two temperatures, there will be two water inlets — one for cold and one for hot. If you only have cold water, you will need only one water intake.
2. Position all adjustment pieces in the wall and drain pipes and also in the pipes that will come out of the bidet’s crockery. Leave them in place for final fitting.
3. Align the bidet dishes with the vase (use the leveler and measuring tape) and mark the design of the dish base and the side holes with the help of a pencil.
4. Place the bidet piece aside. With the help of a drill, drill the floor and place the dowels that will fit the side pins.
5. Position the bidet dishes according to the floor marking and secure the side pins to “stick” the dishes in place.
6. Fit the bidet tubes to the respective water inlets and also to the sewage outlet. Use thread sealant tape to ease the process and prevent leakage.
7. Apply a silicone sealant to the edges of the bidet’s dinnerware base to reinforce the fixing of the item to the floor.
Ready! Wait for the sealant drying time to test the system. For More Info
Open the water valve and test the taps, the water temperature setting (if any) and the drainage. Also check that there is no leakage in the pipes.
TIP: if you really don’t like it or don’t have space for the bidet, install the hygienic shower instead. It is discreet on the side of the vase, facilitating access for hygiene.
Bidet Types:
The step-by-step above how to install bathroom bidets is made for floor-standing bidets. Installation varies by bidet types. Are they:
– Floor bidet: the traditional bidet, fixed to the floor;
– Suspended bidet: it has a more modern design and gives the impression that the dishes are “floating” in the air. Plumbing needs special adjustment as the pipe outlets come on the wall.
– Electronic bidet: it is a more modern and more expensive system, where the bidet system is built into the crockery of the vessel, helping to save space.
Advantages of the bathroom bidet:
Despite being a controversial item, installing a bathroom bidet does have its advantages. They are:
– perform proper intimate hygiene after using the toilet;
– save time, as a bath takes longer than using a bidet;
– facilitate the daily lives of the elderly or people with special needs;
– help with children’s hygiene quickly.
We also highlight some aesthetic details as advantages:
– variety of formats: traditional oval, round, mini bidet, among others;
– several color options: that will match the rest of the bathroom decor;
– different types of finish: there are even bidets with an antibacterial coating.
With good construction planning you can include the bidet in your bathroom layout and enjoy all its benefits.
TIP: do not put a bidet in the toilet. Leave the piece to the family bathroom for more efficient and private use control.
Understand how installing a bathroom bidet works?
Now that you know how to install a bathroom bidet, the types and advantages of the piece, you can choose one to place in your home.
Check all offers in the Bidet section and place the complete order with all the necessary items for installation.
Do you need other materials? Take advantage of the complete offers in the Bathroom section and take the opportunity to place your order online!
